Gaspedal Tuning for your: OPEL Combo (All engines - manufacturing year: 2012-)

Pedalbox - Gaspedaltuning V4.0 - OPEL Combo
Less consumption
Optimal performance
Easy construction

Gaspedal Tuning: OPEL Combo All engines - manufacturing year: 2012-

Building Year
2012-
Delivery time
dispatch in 24 hours
Article ID
10601871-1

Price: 179,00 € inkl. 19% VAT excl. Shipping costs


§ Legal notice

Description

What causes the Speed-Buster Pedalbox in my OPEL Combo?

  • more direct throttle response
  • sporty driving experience
  • better acceleration
  • no additional burden on the engine
  • Automotive electronics remains untouched
  • enables faster gearshifts
  • easy & fast installation and removal
  • attachable switch


Technical Data

Have you ever experienced that your OPEL Combo does not take off quickly after pressing hard on the accelerator pedal?

Even if your Opel has plenty of power, it takes a few seconds until it is available at your disposal.

The original Speed-Buster Pedalbox eliminates these problems by reducing the time lag between pressing of the accelerator pedal and the engine start.

Even with vehicles which do not have much power this reduction in time lag is observable, as the vehicle feels much sportier and reacts swiftly.

The Pedalbox also optimizes the acceleration response of vehicles with automatic transmission. The typical ‘sluggish response’ is eliminated with the use of Pedalbox.



Gaspedaltuning by Speed-Buster


Since 2002 by the most manufacturers the accelerator works no longer mechanically, directly via linkage or cable, instead via the engine control unit on the throttle elements (for gasoline engines) or via the injection system (diesel engines). These so-called "drive by wire" systems are often subject to a perceptible signal delay. The SPEED-BUSTER GP1 is directly connected to the accelerator pedal and optimized independently the signal of the electronic accelerator pedal, causing the engine control unit is induced to another control function. This results in a much more direct response of the vehicle.

It is, contrary to popular belief not possible to cause the speed of the signal by quickly pressing the accelerator.

  • improves the response of your vehicle
  • more direct throttle response
  • sportier handling
  • more torque even at low speed
  • no additional burden on the engine
  • "Made in Germany" from the development to the production site in Sinzig
  • always up to date of all motor types
  • EMC Certification
  • 3 power levels to choose from
  • only small subtle switch in the interior visible

Easy Installation

  • 1. Locate the throttle sensor in the foot space. This is right on the accelerator pedal.
  • 2. Loosen the connector from the accelerator pedal.
  • 3. Now plug the connector from the GP1 in the accelerator pedal sensor.
  • 4. Then connect the plug to the original GP1.
  • 5. Then install the GP1 and the switch to an appropriate position.

Chiptuning Box Select vehicle

Any Questions?

+49(0)2642 999 111

20 Years Experience
Guarantee Engine Protection
Nach oben